Protecting selected frames

During index display you can select multiple images and protect them all at the same time.

1 During index display, select the images you want to protect using k, then press the ibutton.

• The selected images will be shown with v.

• To cancel your selection, press the ibutton again.

2 Press kto select the next images you want to protect, then press the ibutton. 3 After you have selected the images to protect, press the 0button.

Canceling all protections

This function lets you cancel the protection of several images at one time.

1

MENU [q] [RESET PROTECT]

2

Use fg to select [YES], then press the ibutton.

xNotes

•Formatting the card erases all images even if they have been protected. g“Formatting the card” (P. 127)

•Protected images cannot be rotated even when the Fbutton is pressed.

5

 

 

 

Erasing images

 

 

functions Playback

88

Lets you erase recorded images. You can select single-frame erase, which erases only the currently displayed image; all-frame erase, which erases all the images stored on the card; or selected frame erase, which erases only the frames selected.

xNotes

•When you perform all-frame or selected frame erase on images recorded using RAW+JPEG, both the RAW and JPEG images are erased. When using single-frame erase, you can select whether to erase the JPEG, RAW, or both RAW and JPEG images.g“RAW+JPEG ERASE” (P. 106)

•Protected images cannot be erased. Cancel protected images, then erase them.

•You cannot restore images which have been erased. Be careful not to erase important data. g“Protecting images” (P. 87)

EN