Manuals / Brands / Portable Media / MP3 Player / Olympus / Portable Media / MP3 Player

Olympus LS-10 fWarning, Inserting Batteries, •Do not use the AC adapter when connecting the recorder to the USB port

1 71

Download 71 pages, 2.95 Mb

Inserting Batteries

1

Started Getting

Notes

•Manganese battery may not be used in this recorder.

•This recorder cannot charge rechargeable batteries.

•Be sure to turn off power of the recorder before replacing the batteries (☞ P.11). Unloading the batteries while the recorder is in use may corrupt the file. If you are recording into a file and the batteries run out, you will lose your currently recorded file because the file header will not be able to close. It is crucial to change the batteries once you see only one Hash mark in the battery icon.

•If it takes longer than 15 minutes to replace the dead battery or if you take the battery in and out repeatedly at short intervals, you may have to reset the time when you have loaded a fresh battery (☞ P.12).

•Remove the batteries if you are not going to use the recorder for an extended period of time.

•When playing a voice/music file, the recorder may be reset due to the reduction of the voltage output of the battery depending on the volume

level even if [] is displayed in the battery indicator. In this case, lower the volume of the recorder.

Using the AC Adapter

Plug the AC adapter (optional) into a household power outlet and connect the power plug to the recorder’s power connector (DC 5V). Always turn the recorder’s power off before connecting.

If the AC adapter is plugged in while recording using batteries, it may not be possible to play back the voice data being recorded.

•Check the Olympus website regarding AC adapters which can be used with this recorder.

To the power jack

fWarning

•Always turn the recorder’s power off before connection or discon- nection.

•When the AC adapter is not in use, disconnect the power supply plug from the power outlet.

•Use only the correct power sup- ply voltage as indicated on the adapter.

•Do not use the AC adapter when connecting the recorder to the USB port.

10

Contents

Page Introduction Table of Contents Introduction Getting Started About Recording About Playback Safe and Proper Usage <Warning regarding data loss Safe and Proper Usage fWarning Do not attempt to recharge alkaline, lithium or any other •Never use any battery with a torn or cracked outer cover •Keep batteries out of the reach of children Getting Started Main Features Identification of Parts Identification of Parts Folder List Display File List Display File Display Inserting Batteries fWarning Power Supply HOLD Setting Time and Date [Time & Date] Setting Time and Date [Time & Date] 3 Press the `/OK button to complete the setup screen 1 While the recorder is during stop mode, press the MENU button 2 Press the 2 or 3 button to select [Time & Date] 3 Press the `/OK or 9 button Inserting and Ejecting a Card Inserting and Ejecting a Card 2 Push the card inward to unlock it, and let it eject partially About the SD Card Notes on the Folders Notes on the Folders Selecting the Folders and Files About Recording Before Recording Recording Actually producing the sound you would like to record: 4 Press the REC s button again will begin recording 5 Press the STOP 4 button to stop recording About Pause While the recorder is during recording mode, press the REC s button REC Resume Recording: Recommended settings by recording condition Listening While Audio is Recorded Connect the earphone to the EAR jack on Slide the LOW CUT ON/OFF switch and LOW CUT ON/OFF select [ON] or [OFF] Recording from External Microphone or Other Devices Recording with External Microphone: Recording the Sound of Other Devices with This Recorder: Recording the Sound of This Recorder with Other Devices: About Playback Playingback Playingback Settings relating to playback About music file Forwarding While the recorder is during stop mode in the file display, press and hold the 9button While the recorder is during playback mode, press and hold the 0 button Locating the Beginning of the File 2 In the File list display, press the 2 or 3 button to select the file 3 Pressback. the `/OK button to start play A-B REPEAT A-B Cancel the segment repeat playback function Pressing any of the following buttons will release the segment repeat playback a Press the STOP 4 button bPress the `/OK button cPress the 9 button Erasing Erasing 3 Press the 2 button to select [All Erase] 4 Press the `/OK button Menu Setting Menu Setting Method 4 Press the 2or 3button to change the setting (☞ P.36 to P.42) 6 Press the MENU button to close the menu screen Menu Setting Method Rec Mode Rec Level Zoom Mic Rec Monitor Plug-inPower Play Mode Reverb EUPHONY Backlight Contrast LED MemorySelect Memory Info Lock AutoPowerOff Fn Setting Menu Reset System Info Property hSetting menu during recording hSetting menu during playback Tab Function Setting Formatting the Recorder [Format] Formatting the Recorder [Format] 9 Press the `/OK button Rearranging files [Replace] Using the Recorder on Your PC Operating Environment Connecting to Your PC Connecting to Your PC 1 Click the on the task bar located at the lower-rightcorner of the screen. Click [Safely Remove Hardware] Safely Remove Hardware 2 When the safe to remove hardware window appears, click [OK] Transfer the Voice Files to Your PC Using Windows Media Player Insert CD into the CD-ROM drive, and start Windows Media Player Using Windows Media Player 2 From the Features taskbar, click [Rip] menu Connect the recorder to a PC, and 1 start Windows Media Player From the Features taskbar, click [Sync] 3 Click [Sync] menu again to select [DVR] {[Advanced Options] {[Set 4 Select the desired category from [Library] on the left, and select music Library files or albums to transfer to the recorder, and Drag & Drop them in [Sync List] on the right 5 Click [Start Sync] Click [ ] on the upper right corner 5 and set the synchronization options Click [Start Sync]. The file is trans 6 ferred to the recorder Insert the blank CD-R/RWinto the CD-R/RWdrive, and start Windows Media Player Select the desired category from [Library] on the left, and select the CD-ROMdrive, and start [Burn] menu Put a check mark on the voice 3 files that you want to copy Select format of CD before clicking [Start Burn] Using iTunes Insert the CD into the CD-ROM drive, and start iTunes 3 Click [Advanced] tag Click [Importing] to set the file 4 format and bit rate for copying Connect the recorder to a PC, and start iTunes Selecttheplaylisttobetransferred 2 to the recorder, and put the check marks on the music files that you Insert the CD-R/RWinto the CD R/RW drive, and start iTunes 4 format for copying voice files to CD-R/RW,and click [OK] 6 Click [Burn Disc] Using as External Memory of the PC Other Information Alarm Message List Troubleshooting Troubleshooting Technical Assistance and Support Accessories (optional) Specifications Specifications Guide to recording times Guide to battery life EN About the additional functions of the LS-10 FR À propos des fonctions supplémentaires du LS-10 Declaration of Conformity Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Canadian RFI