Menu Setting Method

4Rec Menu (Continued)

Rec Monitor

Select whether or not to output audio while recording from the earphone jack.

Setting:

 

 

[On]: Enables the recording monitor function. Sound will be output from the

 

EAR jack.

 

[Off]: Disables this function. Sound will not be output from the EAR jack.

 

• When the external speaker is connected while recording, there is a risk that audio

 

feedback will occur. It is recommended that you use earphones for the recording

 

monitor, or turn [Rec Monitor] to [Off] while recording (P.24).

 

• When [Rec Monitor] is set to [Off] no sound will come out of the earphones while you

 

are recording (P.24).

Plug-inPower

External microphones which are supported by plug in power can also be used. Whether

or not to supply power to external microphones can be configured.

 

Setting:

 

[On]: When the plug-in power function is activated, power will be supplied to

 

the connected external microphone. Select this when external microphones

 

supported by plug-in power are connected (P.25).

 

[Off]: Disables this function. Select this when external microphones not supported

 

by plug-in power are connected.

 

• Turn the plug-in power function to [Off] when an external microphone not supported

 

by plug-in power is connected, as there is the risk that noise may be generated while

 

recording.

 

• Phantom power cannot be supplied, even when the plug in power function is set to [On].

4Play Menu

4

Setting Menu

Play Mode

There are six play modes. You can select whether to play by file or folder, or all files

 

stored in the recorder.

 

Setting:

 

[File]: Stop after playing back the current file.

 

[File Repeat]: Play the current file repeatedly.

 

[Folder]: Play files continuously in the current folder until the last file and stop.

 

[Folder Repeat]: Play all files in the current folder continuously.

 

[All]: Play all files in the selected memory continuously and stop.

 

[All Repeat]: Play all files in the selected memory continuously and repeatedly.

 

• In [File] mode, when the recorder comes to the end of the last file in the folder, [End]

 

flashes for two seconds on the display and the recorder stops at the start of the last file.

 

• In [Folder] mode, when the recorder comes to the end of the last file in the folder, [End]

 

flashes for two seconds on the display and the recorder stops at the start of the first file

 

in the folder.

 

• In [All] mode, after playing the last file in the folder, the recorder will start playing from the

 

first file in the next folder. When it comes to the end of the last file in the recorder, [End]

 

flashes for two seconds on the display and the recorder stops at the start of the first file

 

in the recorder.

37