Olympus LS-10 Recording the Sound of Other Devices with This Recorder:, Recording the Sound of This Recorder with Other Devices:

Recording

Recording the Sound of Other Devices with This Recorder:

The sound can be recorded when connecting to the audio output terminal (earphone jack) of the other device, and the LINE IN jack of the recorder with the connecting cord KA334 (included within) for dubbing.

Recording the Sound of This Recorder with Other Devices:

The sound of this recorder can be recorded to other devices when connected to the audio input terminal (line jack) of other devices and the EAR jack of this recorder, with the connecting cord KA334 (included within) for dubbing.

2

Recording About

	To audio output
	terminal of other
To LINE IN	devices
jack

Notes

•If you are unable to produce a clear recording with this recorder even after adjusting the recording level (☞ P.20), this could potentially be because the output level for the connected devices is too high or too low. When external devices are connected, perform a test record- ing and then adjust the output level for the external devices.

•Do not connect the connecting cord to the MIC jack when recording sound from other device with this recorder.

To audio input

terminal of

other devices

To EAR

jack

Notes

•When you adjust the various sound quality settings related to playback on the recorder, the audio output signal sent out from the EAR jack will change as well (☞ P.34, P.38).

•In case of recording on other devices without a line input, the input may be too large to con- trol when the audio is input to the microphone jack. In this case, use the connecting cord KA333 (optional) with attenuation resistance (☞ P.65).

26