Inserting and Ejecting a Card

Notes

•It is possible to switch the recording media over to the built-in flash memory (☞ P.34, P.39).

•In some cases cards which have been format- ted (initialized) by another device, such as a computer, cannot be recognized. Be sure to format them with this recorder before using (☞ P.43).

•When attempting to perform operations such as rewriting the contents of an SD Card in cases where the card has been write protected, [SD Card Locked] will appear. The playback opera- tion can be performed, but the write protection must first be turned off when overwriting the contents on the card.

•Cards that are not to SD standards, such as multimedia cards, may not be used.

Ejecting a Card

2 3 button `/OK button

1 While the recorder is during stop mode, open the card cover.

2 Push the card inward to unlock it, and let it eject partially.

•The card is visibly out of the slot and can be removed safely.

When

[MemorySelect] is set to [SD Card], [Built-in Memory Selected] will appear

3 Close the card cover securely.

Note

•Releasing your finger quickly after pushing the card inward may cause it to eject forcefully out of the slot.

About the SD Card

When the SD Card is write protected, there will be a display reading [SD Card Locked]. Before inserting the card, turn off the write protection function. Check the Olympus website regarding SD cards which are confirmed operation with this recorder (☞ P.65).

If the write protection switch is facing the

[LOCK] direction,

recording and other LOCK functions cannot be

carried out

Notes

•The recorder may not recognize correctly on some SD cards. In this case, remove the card then put it again to see if the recorder recognizes the card.

•The processing performance reduces in a SD card when you repeat writing and delete. In this case, format the SD card (☞ P.43).

1

Started Getting

15