Inserting and Ejecting a Card

1

Started Getting

This recorder can be used with commercially available SD Cards as well as the built-in flash memory.

Inserting a Card

2 3 button `/OK button

1 While the recorder is during stop mode, open the card cover.

2 Face the card the correct way and insert it into the card slot as shown in the diagram.

Insert the card keeping it straight.

The card stops with a click when it is inserted all the way.

Inserting the card the wrong way or at an angle could damage the contact area or cause the card to jam.

If the card is not inserted all the way, data may not be written to the card.

3 Close the card cover securely.4 When you are recording to a card,press the 2 or 3 button and select [Yes].

When you insert the card, the recording media changeover display will appear

5 Press the `/OK button to complete the setup screen.

14