Troubleshooting
Symptom | Probable cause | Action | |
| The batteries are not loaded properly. | Verify that the batteries’ polarities = and | |
| - are correct (☞ P.9). | ||
|
| ||
Nothing appears on the | Battery power is getting low. | Replace with new batteries (☞ P.9). | |
display |
|
| |
| The power is off. | Turn the power on (☞ P.11). | |
|
|
| |
| Battery power is getting low. | Replace with new batteries (☞ P.9). | |
|
|
| |
Won’t start | The power is off. | Turn the power on (☞ P.11). | |
|
|
| |
| The recorder is in HOLD mode. | Release the recorder from HOLD (☞ P.11). | |
|
|
| |
| Low remaining memory. | Erase unnecessary files (☞ P.32). | |
|
|
| |
Unable to record | The maximum number of files has | Change to the another folder | |
been reached. | (☞ P.16 to P.18, P.20). | ||
| |||
| The SD Card is set to write protection. | Undo the SD Card’s write protection setting | |
| and then try again (☞ P.15). | ||
|
| ||
No sound picked up by the | An external microphone or external | Detach all external microphones and | |
external devices connected to the LINE IN | |||
device is connected. | |||
jack and the MIC jack (☞ P.25, P.26). | |||
| An external device is connected to the | Detach the connecting cord from the | |
Unable to record through | LINE IN jack. | recorder. | |
An external microphone supported by | Set | ||
an external microphone | |||
| external microphone supported by | ||
| Power] is set to [Off]. | power is connected (☞ P.34, P.37). | |
| The earphone is connected. | Unplug the earphones to use the internal | |
| speaker. | ||
No playback tone heard |
| ||
The volume level is set to [0]. | Adjust the volume level (☞ P.27). | ||
| |||
|
|
| |
| The recording level has not been ad- | Adjust the recording level and then try | |
| justed. | recording once more (☞ P.20). | |
| The microphone sensitivity is too low. | Set the microphone sensitivity to [HIGH] | |
Recording level too low | mode and try again (☞ P.24). | ||
| |||
| This could potentially be because the | If you cannot record clearly even after | |
| adjusting the recording level, then adjust the | ||
| recording level and output level for the | ||
| output level for the connected devices | ||
| connected external devices are too low. | ||
| (☞ P.20). | ||
| The recording level has not been ad- | Adjust the recording level and then try | |
| justed. | recording once more (☞ P.20). | |
Recording level too high | This could potentially be because the | If you cannot record clearly even after | |
| recording level and output level for con- | adjusting the recording level, then adjust the | |
| output level for the connected devices | ||
| nected external devices are too high. | (☞ P.20). | |
|
|
|
6
Information Other
63