Olympus LS-10 3 Press the `/OK or 9 button, Setting Time and Date [Time & Date], 4 Press the MENU button to close the menu screen

Setting Time and Date [Time & Date]

•You can select between 12 and 24 hour display by pressing the LIST button while setting the hour and minute.

Example: 10:38 P.M

10:38 PM 22:38 (Initial setting)

•You can select the order of the [year], [month], [day] by pressing the LIST button while setting them.

Example: January 7, 2008

1M 7D 2008Y (Initial setting)

7D 1M 2008Y

2008Y 1M 7D

Changing the Time and Date

While the recorder is during stop mode, press and hold the STOP 4 button to display the Time and Date, Remaining Memory and File Format.

If the Time and Date is not correct, set it using the procedure below.

2 3 button

9 0 button `/OK button

MENU button

LIST button

1

Started Getting

3 Press the `/OK button to complete the setup screen.

•The clock will start from the set date and time. Press the `/OK button according to the time signal.

Note

•If you press the `/OK button during the setup operation, the recorder will save the items that were set to that point.

1 While the recorder is during stop mode, press the MENU button.

•The menu will appear on the display. You can also change to [Others] screen by using the settings tab (☞ P.34).

2 Press the 2 or 3 button to select [Time & Date].

[Time & Date] will appear on the display

3 Press the `/OK or 9 button.

•[hour] will flash on the display, indicat- ing the start of the Time and Date setup process.

The following steps are the same as Step 1

through Step 3 of “Setting Time and Date [Time & Date]” (☞ P.12).

4 Press the MENU button to close the menu screen.

13