Olympus TG-320 48 EN, Turning on the camera with the q button q Power On, System requirements

For information on using the menus, see “Setup menu” (p. 6).

Selecting a method for connecting the camera to other devices [USB Connection]

r(Settings 1) X USB Connection

Submenu 2	Application
	When the camera is connected to
Auto	another device, the settings selection
	screen is displayed.
	Select when connecting the camera
Storage
	to a computer via a storage device.
	Select when transferring images
MTP	without using the supplied ib (PC
	software) on Windows Vista/
	Windows 7.
Print	Select when connecting to a
	PictBridge-compatible printer.

System requirements

Windows	:	Windows XP (Service Pack 1 or
		later) /Windows Vista / Windows 7
Macintosh	:	Mac OS X v10.3 or later

When using another system other than Windows XP (SP2 or later)/Windows Vista/Windows 7, set to [Storage].

Even if a computer has USB ports, proper operation is not guaranteed in the following cases:

●Computers with USB ports installed using an expansion card, etc.

●Computers without a factory-installed OS and home-built computers

Turning on the camera with the q button [q Power On]

r(Settings 1) X q Power On

	Submenu 2	Application
		The camera is not turned on. To turn
No		on the camera, press the n
		button.
		Press and hold the q button to turn
	Yes
		the camera on in the playback mode.

Saving the mode when the camera is turned off [KeepzSettings]

r(Settings 1) X KeepzSettings

	Submenu 2	Application
No		The shooting mode is set to P mode
		when the camera is turned on.
		The shooting mode is saved when
		the camera is turned off and is
	Yes
		reactivated the next time the camera
		is turned on.

Choosing the opening screen display [Pw On Setup]

r(Settings 1) X Pw On Setup

		Submenu 2	Application
	Off		No opening screen is displayed.
On			The opening screen is displayed
			when the camera is turned on.

48EN