How to Apply the Wrist Cuff
Wrap the Wrist Cuff.
1.Place the wrist cuff over your left wrist with your left thumb facing upward.
*Wrap the wrist cuff over bare skin.
*Be sure not to roll in the sleeve of your cloth into the wrist cuff.
*As shown in the Figure, cover
the wrist cuff by leaving a space of 10 to 15 mm (a space almost equal to the width of an index finger) between the edge of the wrist cuff and the border of arm and the palm of a hand.
2.Hold the bottom part of the wrist cuff and wrap it around the wrist while pulling so that it fits snugly.
*Unless the wrist cuff is wrapped snugly, correct measurement may not be possible.
*The remaining part of the wrist cuff can be conveniently folded back out of the way.
*For the slender wrist (wrist circumference of less than 145 mm), the wrist cuff may not be wrapped snugly and give a feeling of loose wrap. In this case, do not force to wrap since the measurement is not affected.
*Fasten the Velcro tape tightly by closely adhering both sides.
When measuring on the right wrist
Measurement can also be made on the right wrist. Fit the monitor as shown in the Figure.
8
