EXP Computer S200 manual SVCs. The possible states are Blank for PVCs blank

Bridge Statistics

Description of This table describes screen terms for pages 1 and 2 of the Detailed LAN Connection

Screen Terms Statistics shown in Figures 65 and 66.

Term	Description
Call Summary	This field provides information about the following:
	• Connection Type: Specifies whether the connection is
	an SVC or a PVC.
	• Connection State: Specifies the current state of the
	PVC or SVC.
	Possible states are: Unconfigured; Calling; Waiting;
	Connected; Autocall Failure; Software Disabled;
	Operator Disabled; Congested. This means either the
	Frame Relay link is receiving BECNs or the node is
	running low on Data Buffers. Or, if the LCON queue
	backs up due to too much traffic passing from the
	LAN to the WAN, the connection state may be
	Congested.
	• Forwarders Connected: Specifies which forwarders
	are currently connected to this LAN Connection:
	Source Route; Spanning Tree).
	• Remote Address: Specifies the called address of the
	remote WAN Adapter LAN Connection for connected
	SVCs. The possible states are: Blank for PVCs; blank
	for disconnected SVCs; No Mnemonic (for autocall
	SVCs whose mnemonic does not exist in the
	Mnemonic Table); Max Attempts (for Autocall SVCs
	that reached their autocall maximum attempts count).
	• Number of auto call attempts: Specifies the number of
	times the WAN Adapter attempted to autocall before
	it either succeeded or failed in establishing the
	connection.
	• Last clear cause code: This is the cause code in the
	call clear packet last received by the LAN connection
	and explains why the last call was cleared.
	• Last clear diagnostic code: This is the diagnostic code
	in the call clear packet last received by the LAN
	connection and explains why the call was cleared.

138 Bridging