EXP Computer S200 manual Spanning Tree Statistics, Stpe Status, Status report, Term Description

Bridge Statistics

Spanning Tree Statistics

Spanning Tree Figure 58 shows the information displayed by the Spanning Tree Status report.

(STPE) Status

Node:	Address:				Date:	Time:
Spanning Tree Statistics						Page: 1 of 1
STPE Bridge ID:	00:ff:ff:ff:00:00:00:00 Root Bridge ID: 00:ff:ff:ff:ff:ff:ff:ff
Root Path Cost	03			Root Port: Bridge-Link
Max Age:	0			Forward Delay: 0
Last Topological Change			09-AUG-1993 08:21:33
Topological Changes			0
Bridge-Link		State		Priority	Path Cost
___________		_____		________	_________
1		Forwarding		128	1
5		Forwarding		128	1

Figure 58. Spanning Tree Status

Descriptions for This table describes the screen terms for the Spanning Tree Statistics report. the Spanning Tree

Status report

Term	Description
STPE Control	Configured value of STPE Control. If STPE is configured for
	MAN, the rest of the parameters are not displayed.
STPE Bridge ID	The value of the bridge ID which is transmitted by the bridge
	in STPE PDUs.
Root Bridge ID	The root of the spanning tree as determined by the STPE.
Root Path Cost	The cost of the path to the root as seen from this bridge.
Root Port	The bridge link number that offers the lowest cost path from
	this bridge to the root bridge.
Max Age	The actual Max Age timeout value that this bridge is
	currently using.
Forward Delay	The actual Forward Delay value that this bridge is currently
	using. The amount of time before sending a regular
	(non-spanning tree) frame.
Last Topological	The time when the last topological change was detected.
Change
Topological	The number of topological changes since the last reset or
Changes	restart.
Bridge Link	Number of specified bridge link.

Bridging 125

T0008-16F Release 5.2M