Mixed LAN Operation

Mixed LAN Operation

Overview

PathBuilder S24x, 26x, and 27x switches support a mixture of Token Ring and

 

Ethernet interfaces configured on the same node. This means the PathBuilder S24x,

 

26x, and 27x switch is able to perform remote Transparent bridging for Ethernet

 

LANs and remote Source Route Bridging from the same PathBuilder S24x, 26x, and

 

27x switch, as shown in Figure 54.

Ethernet 1

Port 13

PB S200

Port 19

Ethernet 2

WAN

Ethernet 1

PB S200

Ethernet 2

Mixed LAN

Environment

Limitations

Figure 54. Example of Mixed LAN Bridging in PathBuilder S24x, 26x, and 27x Switch

These limitations apply when you perform Mixed LAN bridging in a PathBuilder S24x, 26x, and 27x switch:

The PathBuilder S24x, 26x, and 27x switch is limited to only one Spanning Tree Entity (SPTE) per node. If you perform automatic spanning tree in a Mixed LAN implementation, SPTE may prohibit traffic from passing between LANs by blocking some bridge links to avoid bridge looping.

You must install Release 4.90 or above operating software on all PathBuilder S24x, 26x, and 27x switches in your network to perform Mixed LAN opera- tion on any node in the network. If you have a mixture of nodes running ear- lier operating software releases, mixed LAN operation will cause node crashes. A PathBuilder S24x, 26x, and 27x switch used as a router and config- ured for Mixed LAN operation is not impacted by this limitation.

114

Bridging

Page 118
Image 118
EXP Computer S200 manual Mixed LAN Operation, 27x switch, as shown in Figure, Mixed LAN Environment Limitations