EXP Computer S200 manual These parameters make up the Protocol Filter Table Record

						Bridge Filtering
Configuring the Protocol Filter Table
Introduction
	The Protocol Filter Table prevents stations operating with a certain protocol from
	operating outside their intended scope. This filtering action is applied to that part of
	the frame that defines the protocol carried by the frame.
		Note
		A Table boot must be performed to implement changes to the Protocol Filter
		Table parameters.
Protocol Filter
	Figure 36 shows the Protocol Filter Table parameters.
Table Parameters
		Node:		Address:	Date:	Time:
		Menu: Configure Bridge				Path:
		Bridge Parameters
		Bridge Link Parameters
		MAC Address Filter Table
		Protocol Filter Table
			Entry Number
			Protocol Type
			Protocol Value
			Incoming Protocol Link Action
			Outgoing Protocol Link Action
	Figure 36. Configure Protocol Filter Table Menu
Parameters
	These parameters make up the Protocol Filter Table Record.
	Entry Number
	Range:		1 to 100
	Default:		1
	Description:		Entry number used to reference this table record.

Bridging 71

T0008-16F Release 5.2M