EXP Computer S200 manual LAN Forwarder Type, ROUT, BRID, Brout, Rout, LAN Connection Type

Configuring the PathBuilder S200 Series Switch for Bridging Operation

*LAN Forwarder Type

Range:	ROUT, BRID, BROUT
Default:	ROUT
Description:	Specify if the LAN Connection is to pass bridged, routed, and/or
		brouted traffic:
			• BRID: Bridged LAN traffic is transported across this
			connection.
			• ROUT: Routed LAN traffic is transported across this
			connection.
			• BROUT: Both bridged and routed LAN traffic are transported
			across this connection.
Boot Type:		Changes to this parameter require a Node Boot to take effect.
LAN Connection Type
Range:	PT_to_PT, GROUP
Default:		PT_to_PT (Point-to-Point)
Description:		Specify whether this LAN Connection defines a point-to-point
		connection across the WAN, or is part of a group of LAN
		Connections. If configured as GROUP, multiple LAN Connections
		can use the same Router Interface number. If configured as
		PT_to_PT, the Router Interface configured must be unique to this
		LAN Connection.
			Note
		This parameter appears if the LAN Forwarder Type is configured
		as ROUT or BROUT.
Boot Type:	When changing from GROUP to PT_PT, a Node boot is required.
		Otherwise, a Table and Node Record boot is required.
Router Interface Number
Range:	5 to n, where n = 36 to 254
Default:	5
Description:	Specifies a Router Interface using this LAN Connection record.
		This connection makes it possible to pass LAN data through the
		WAN network to a remote router. The allowable range of values
		reflect the maximum number of IP or IPX interfaces set in the IP
		or IPX Parameters Menu.
			Note
		This parameter appears if the LAN Forwarder Type is configured
		as ROUT or BROUT.
Boot Type:		Changes to this parameter require a Node Boot to take effect.

32 Bridging