Bridge Filtering

Configuring NetBIOS Name Filtering

Introduction

This section describes how to use the Control Terminal Port (CTP) to configure

 

NetBIOS Name Filtering.

How to Configure

 

Follow these steps:

NetBIOS Name

Filtering

Step

Action

1Configure the NetBIOS Name Filter Action parameter in the Bridge Link Parameters.

2Configure the parameters in the NetBIOS Name Filter Table record.

Bridge Link

Figure 40 highlights the parameter, NetBIOS Name Filter Action, in the Bridge Link

Parameters Record

Parameters record.

Node:

Address:

Date:

Time:

Menu:

Configure Bridge

 

Path

Bridge Parameters

Bridge Link Parameters

Entry Number

Hop Count Limit

Largest Frame Size

MAC Address Filter Action

Protocol Filter Action

NetBIOS Name Filter Action

STPE Link State

Figure 40. Bridge Link Parameters Record

78

Bridging

Page 82
Image 82
EXP Computer S200 manual Configuring NetBIOS Name Filtering, How to Configure, Step Action, Parameters Record