26 Bridging
Configuring the PathBuilder S200 Series Switch for Bridging Operation
Bridge Link Parameters
Introduction The bridge uses Bridge Links as connections to the LAN and WAN networks.
The LAN Bridge Link connects the bridge directly to the local LAN, and its
parameters control the characteristics of this connection.
The WAN Bridge Link parameters let you establish and maintain SVC connections
to a remote LAN bridge. The bridge views the LAN bridge links and the WAN
bridge links as links to the networks attac hed to it.
Bridge Link
Parameters Figure 15 shows the Bridge Link param eters.

Figure 15. Configure Bridge Link Menu

Node: Address: Date: Time:
Menu: Configure Bridge Path:
Bridge Parameters
Bridge Link Parameters
Entry Number
Bridge Type
Bridge ID
Hop Count Limit
Largest Frame Size
MAC Address Filter Action
Protocol Filter Action
NETBIOS Name Filter Action
STPE Link State
Link Mode
Virtual Ring Number