EXP Computer S200 manual Hop Count Limit, Largest Frame Size, MAC Address Filter Action, None

Configuring the PathBuilder S200 Series Switch for Bridging Operation

Hop Count Limit

Range:	0 to 7
Default:	7
Description:	Specifies the maximum number of bridges through which a
	broadcast frame may pass on the way to its destination.

Largest Frame Size

Range:	516, 1500, 2052, 4472
Default:	2052
Description:	Specifies the maximum size of the INFO field that this Bridge
	Link can send and receive. The minimum value of this parameter
	or of adjacent Bridge Link or values of Largest Frame Size of
	bridge wide parameter is used to determine whether a modification
	of the Routing Control field of RIF is necessary.

MAC Address Filter Action

Range:	NONE, PASS, BLOCK
Default:	NONE
Description:	Specify how the MAC Address Filter Table is used.
	• NONE: No MAC address filtering using the MAC Address
	Filter Table is performed for this link.
	• PASS: Look in the MAC Address Filter Table for an entry
	with a matching MAC frame address and take the filtering
	action specified by this filter table. If no matching entry is
	found, this value indicates that this frame should be passed.
	• BLOCK: Look in the MAC Address Filter Table for an entry
	with a matching MAC frame address and take the filtering
	action specified by this filter table. If no matching entry is
	found, this value indicates that this frame should be blocked.

28 Bridging