How to Measure Blood Pressure (in AVG. Mode)
1.Wrap the arm cuff over the patient’s arm.
2.Push the ON/OFF (power) Button to turn on the power.
ON/OFF
START
HIDE
|
|
| DEFL ATION | |
| AVG./1s | t/2nd/3rd | ||
MODE |
| |||
140 | 180 | SINGLE |
| |
| AVG. | MANU. |
| |
100 | 220 | CHECK |
| |
STOP
| 260 |
AUTO | 280 |
3. Set the MODE Selector to
“AVG.”. |
| ON/OFF |
|
| |
| HIDE | START |
|
| |
|
| DEFL ATION |
MODE | AVG./1s t/2nd/3rd | |
| ||
140 180 | SINGLE | MANU. |
| AVG. | |
100 | 220 | CHECK |
| 260 | STOP |
|
| |
AUTO | 280 |
|
4.Set the
•When setting the
•When the systolic pressure is expected to exceed 220 mmHg, proper in ation may not be pos- sible in “AUTO” setting.
Set the target in ation value to 30 to 40 mmHg higher than the expected systolic pressure.
ON/OFF
START
HIDE
|
|
| DEFL ATION | |
| AVG./1s | t/2nd/3rd | ||
MODE |
| |||
140 | 180 | SINGLE |
| |
| AVG. | MANU. |
| |
100 | 220 | CHECK |
| |
STOP
| 260 |
AUTO | 280 |
5.Push the START Button to start the measurement.
•Set the unit to the start time of the rst measurement, then the unit starts measurement auto- matically.
•After displaying the results of rst measurement, the unit will measure blood pressure in the set number of times automati- cally by taking an interval.
•For the setting of the number of measurements, the waiting time before start of measurement, and the interval time, refer to Page 7.
ON/OFF
START
HIDE
|
|
| DEFL ATION |
| AVG./1s t/2nd/3rd | ||
MODE | |||
140 | 180 | SINGLE | |
| AVG. | MANU. | |
100 | 220 | CHECK | |
STOP
| 260 |
AUTO | 280 |
6.Measured results are displayed.
•After the measurement is completed, average values are displayed.
•Each time a DEFLATION (de ation control) Button is pushed, the measurement results for each time are displayed.
SYS
mmHg
DIA
mmHg
PULSE
BPM
HIDE
7. Push the ON/OFF (power)
Button to turn off the power. |
| ON/OFF |
| HIDE | START |
|
| |
|
| DEFL ATION |
MODE | AVG./1s t/2nd/3rd | |
| ||
140 180 | SINGLE | MANU. |
| AVG. | |
100 | 220 | CHECK |
| 260 | STOP |
|
| |
AUTO | 280 |
|
To stop the measurement during the measurement:
Push the STOP Button.
To start the stopped measurement again:
Push the START Button.
17
