Omron Healthcare HEM-907 instruction manual How to Measure Blood Pressure in MANU. Mode

How to Measure Blood Pressure (in MANU. Mode)

1.Wrap the arm cuff over the patient’s arm.

3.Push the ON/OFF (power) Button to turn on the power.

ON/OFF

START

HIDE

			DEFL ATION
P-SET			AVG./1s t/2nd/3rd
		MODE
140	180	SINGLE
	AVG.	MANU.
100	220	CHECK

STOP

	260
AUTO	280

2.Place the stethoscope on the patient’s arm.

4.Set the MODE Selector to “MANU.”.

ON/OFF

START

HIDE

		DEFL ATION
P-SET		AVG./1s	t/2nd/3rd
		MODE
140	180	SINGLE
	AVG.	MANU.
100	220	CHECK

STOP

	260
AUTO	280

5.Set the P-SET (pressure set- ting) Volume to “AUTO” or the target in ation value.

•When setting the P-SET to “AUTO”, turn the Volume coun- terclockwise as far as it goes un- til you can hear the click sound.

•When the systolic pressure is expected to exceed 220 mmHg, proper in ation may not be pos- sible in “AUTO” setting.

Set the target in ation value to 30 to 40 mmHg higher than the expected systolic pressure.

ON/OFF

START

HIDE

		DEFL ATION
P-SET		AVG./1s t/2nd/3rd
		MODE
140	180	SINGLE
	AVG.	MANU.
100	220	CHECK

STOP

	260
AUTO	280

6.Push the START Button to start the measurement.

•In the “AUTO” setting, the unit stops in ation at the pres- sure considered to be 30 to

40 mmHg above the expected systolic pressure, then start de ation.

•The unit can be re-in ated

only while the START Button is pushed.

•The pressure display is syn- chronized with the pulse rate and renewed.

•Each time the DEFLATION (de ation control) Button is pushed, the unit de ates by 5~10 mmHg.

•When you press the STOP But- ton, the unit de ates fast and ends the operation.

ON/OFF

START

HIDE

			DEFL ATION
P-SET			AVG./1s t/	2nd/3rd
		MODE
140	180	SINGLE
	AVG.	MANU.
100	220	CHECK

STOP

	260
AUTO	280

7. Push the ON/OFF (power)

Button to turn off the power.		ON/OFF
	HIDE	START
		DEFL ATION
P-SET	MODE	AVG./1s t/2nd/3rd
140 180	SINGLE	MANU.
	AVG.
100	220	CHECK
	260	STOP
AUTO	280

18