USING THE DEVICE
5.At the end of the treatment, turn the power switch off. The power switch is in the 
position. The compressor turns off and nebulization stops.
6.Disconnect the Air Tubing from the Nebulizer Kit. Grasp the end of the Air Tubing connected to the nebulizer kit and gently pull down to disconnect the Air Tubing from the Air Tubing Connector on the bottom of the nebulizer kit.
7.Check the Air Tubing. No condensation or moisture should remain in the Air Tubing.
WARNING
Do not store the air tubing with moisture or medication remaining in the air tubing. This could result in infection as a result of bacteria.
If any condensation or moisture remains in the air tubing, remove the moisture from the air tubing. Follow the directions below:
1.Make sure the Air Tubing is still connected to the Air connector on the front side of the compressor.
2.Turn the power switch on. The power switch is in the (1) position. The compressor will start and pump air through the air tubing to expel the moisture.
3.Turn the power switch off.
8.Disconnect the Air Tubing from the compressor. Grasp the end of the Air Tubing and gently pull the Air Tubing off the Air Connector on the front side of the compressor.
9.Unplug the device from the electrical outlet.
CAUTION
Unplug the power cord from the electrical outlet after using the device.
15
