One for All 6-Device Universal Remote owner manual Using Macros, To Operate Master Power Macro

OFA 6L with Learning Owners Manual.fm Page 10 Thursday, February 17, 2005 1:10 PM

ONE FOR ALL 6L UNIVERSAL REMOTE CONTROL WITH LEARNING

1.Press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 5. The LED will blink twice.

3.Select an open macro key (e.g., M1) and press it once.

4.Press CBL/SAT once.

5.Enter the channel number: 5 2.

NOTE: If you have access to over 100 channels, enter 0 5 2. Moreover, if the original remote control requires you to press ENTER to change the channel, also press ENTER after the channel number (e.g., 0 5 2 ENTER).

NOTE: You can program up to 20 functions on the macro keys.

6.Press and hold SET until the LED blinks twice, then release SET.

Now when you press M1, you will instantly see cable channel 52 on your TV set.

PROGRAMMING A MASTER POWER MACRO

In its default state, the POWER key on the One For All 6L Universal Remote Control with Learning (URC-6820 B00) will individually power your home entertainment devices on or off. However, you can also program a Master Power Macro onto the POWER key that will sequentially turn on or off all the devices with a single key press.

To Program the Master Power Macro

1.Press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 5. The LED will blink twice.

3.Press the POWER key once.

4.For the first device you want in the power-on sequence, press its device key (e.g., TV) once.

5.For the second device you want in the power-on sequence, press its device key (e.g., CBL/SAT) once.

6.For the Third device you want in the power-on sequence, press its device key (e.g., AUD) once.

7.Repeat step 6 up to three more times to add the other desired devices to the power-on sequence (e.g., VCR, DVD, and PVR ).

8.To save the settings and exit the program, press and hold SET until the LED blinks twice, then release SET.

To Operate Master Power Macro

1.After programming, point the remote control at the devices and press POWER for at least 2 seconds to sequentially turn on (or off) your devices.

NOTE: When you press POWER for less than 2 seconds, a power command will only be sent to the currently-selected device. This allows you to still individually power devices on or off.

2.Devices will turn on (or off) according to your programmed sequence.

NOTE: The currently-selected device will always turn on or off first, followed by the remaining programmed sequence. After the master power sequence has been completed, the remote control will be set to control the first powered-on device.

NOTE: If one or more devices does not have a POWER key, the power off/on sequence may be slightly delayed when the remote control signals the device(s).This action is normal.

PROGRAMMING A MACRO ON A DEVICE KEY

In its default state, when you press a device key (e.g., TV) on the One For All 6L Universal Remote Control with Learning (URC-6820

10 Using Macros