Extra Features
Macros (Sequence of commands within a certain mode)
Within a certain device mode you can program your
Example: To program a macro on the LAST key to go to “AV” mode (in TV mode) then to channel 801 of your
1.Press and release TV key to select the mode where you want to execute the macro.
2.Press and hold down REWIND + FASTFORWARD
simultaneously until the
3. | Press 9 9 5. The LED will blink twice. |
4.Then press the LAST key (to which the Macro will be assigned).
5. | Next press TV then AV then STB then 8 0 1 to select the |
| desired channel on your |
6.To store the Macro, press and hold the OK key until the LED will blink twice.
Result: In TV mode, when you press and hold the LAST key the
-If you need to build in some delay into the sequence please use the corresponding
-Each MACRO can consist of a maximum of 32 key strokes.
-Make sure that you program a Macro on a spare key, as the Macro will overwrite the
-If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your
Erasing the Macro
Example: To erase the Macro from the LAST key in STB mode, press:
1.Press and release the device key (e.g. STB key) to select the mode where the macro is stored.
2.Press and hold down REWIND + FASTFORWARD
simultaneously until the
3. | Press 9 9 5. The LED will blink twice. |
4.Press the LAST key (from which you want to erase the macro).
5.To clear the Macro, press and hold the OK key until the
LED will blink twice.
WWW.ONEFORALL.COM | 9 |
