Onkyo DV-SP1000 Initial Setup, First Time Setup, Use the Up and Down, Then press Enter

Initial Setup

This chapter explains the settings you need to make the very first time the DV-SP1000/DV-SP1000E is turned on.

	ON	STANDBY			TV
				I		INPUT
	1		2	3		+
						TV CH
	4		5	6		-
	7		8	9
						TV VOL
	+10		0	CLEAR
	SEARCH	MEMORY		DIMMER		AMP INPUT	2
	S		M	D		INPUT
			AMP INPUT
	DVD		V1	V 2		V3
			MODE
	DVD		AMP	VCR		TV
						PICTURE
	ZOOM ON					CONTROL
ENTER			ENU	M
	AUDIO		PM	EN	U
		TO
	SEL
	+
	CH
	ZOOM		ENTER			VOL
	L MODE
	-
		RE	TURN	UP
				SET
	DISPLAY					MUTING
	LAST MEMORY		STEP/SLOW			RANDOM
	REC LM					RD
	AUDIO	SUBTITLE		ANGLE		RESOLUTION

The On-Screen Language menu appears next.

Use the Up and Down []/[ ] buttons to select a language, and then press [ENTER].

See page 81 for more information on the language options.

The i.LINK Output Setting menu appears next.

First Time Setup

The very first time you turn on the DV-SP1000/ DV-SP1000E, the Initial Setup menu appears onscreen.

Here you need to make a few settings to get the DV-SP1000/DV-SP1000E up and running. You can change these settings later (see page 68).

3

Use the Up and Down []/[ ] buttons to select Off or On for the i.LINK Output Setting (i.LINK), and then press [ENTER].

See page 76 for more information on the i.LINK Output Setting.

If the i.LINK Output Setting is set to Off, the Analog Audio Out menu appears next.

If it’s set to On, the Initial Setup menu closes.

1	Use the Up and Down [ ]/[ ]	4
Remote controller	buttons to select a TV shape, and

then press [ENTER].

ENTER

	Select 4:3 Letter box or 4:3 Normal if
	you have a 4:3 TV. Select 16:9 Wide-
ENTER	screen if you have a widescreen TV.
	See page 72 for more information.

On the Analog Audio Out menu, use the Up and Down []/[ ] buttons to select 2 Channel or Multi Channel (default), and then press [ENTER].

Choose 2 Channel if you’re connecting the FRONT AUDIO OUTs to a stereo amp.

Choose Multi Channel if you’re con- necting the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTs to a multichannel amp.

If you select 2 Channel, the setup is complete and the Initial Setup menu closes. If you select Multi Channel, continue with this procedure.

43