Onkyo DV-SP1000 instruction manual Digital Out/Digital2 Hdmi, Linear PCM Out, Mpeg Out

Configuring the DV-SP1000/DV-SP1000E—Continued

■MPEG Out

With this setting you can configure the DIGITAL 1 AUDIO OUTs to output MPEG audio as it is or to down- mix it into 2-channel PCM.

MPEG

Choose this option if you’re connecting a component with a built-in MPEG decoder.

MPEG > PCM (default)

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A con- verter.

■Digital Out

With this setting you can turn the DIGITAL 1 AUDIO OUTs on or off. Depending on how you connect the DV- SP1000/DV-SP1000E to your other components, this can be useful in certain situations.

On (default)

DIGITAL 1 AUDIO OUTs are on.

Off

DIGITAL 1 AUDIO OUTs are off.

Notes:

• This setting has no effect on the analog audio outputs.

Digital Out/Digital2 (HDMI)

With these settings you can determine how the DV- SP1000/DV-SP1000E outputs digital audio from its HDMI OUT and DIGITAL 2 AUDIO OUTs. The options you choose will depend on the type of compo- nent that you connect to the DIGITAL 2 AUDIO OUTs.

■Dolby Digital Out

With this setting you can configure the DIGITAL 2 AUDIO OUTs to output Dolby Digital audio as it is or to downmix it into 2-channel PCM.

Dolby Digital (default)

Choose this option if you’re connecting a component with a built-in Dolby Digital decoder.

Dolby Digital > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input, an AV receiver with a built- in Dolby Pro Logic decoder, or an external D/A converter.

■DTS Out

With this setting you can configure the DIGITAL 2 AUDIO OUTs to output DTS audio as it is or to down- mix it into 2-channel PCM.

DTS (default)

Choose this option if you’re connecting a component with a built-in DTS decoder.

DTS > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A converter.

Notes:

•When playing the DTS audio of a DTS CD, set the CD Audio Setup setting to DTS (see page 80).

■MPEG Out

With this setting you can configure the DIGITAL 2 AUDIO OUTs to output MPEG audio as it is or to down- mix it into 2-channel PCM.

MPEG

Choose this option if you’re connecting a component with a built-in MPEG decoder.

MPEG > PCM (default)

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A con- verter.

■Digital Out

With this setting you can turn the DIGITAL 2 AUDIO OUTs on or off. Depending on how you connect the DV- SP1000/DV-SP1000E to your other components, this can be useful in certain situations.

On (default)

DIGITAL 2 AUDIO OUTs are on.

Off

DIGITAL 2 AUDIO OUTs are off.

Notes:

• This setting has no effect on the analog audio outputs.

Linear PCM Out

DVD-V DVD-A DVD-VR VCD CD MP3

With this setting you can configure the DV-SP1000/ DV-SP1000E to output digital audio with a high sam- pling rate (e.g., 96 kHz) as it is or to downsample it to 48 kHz. This setting applies to the DIGITAL 1 and DIG- ITAL 2 AUDIO OUTs.

Down Sample On

Choose this option if the component connected to the DIGITAL 1 or 2 AUDIO OUTs doesn’t support high sampling rates.

Down Sample Off (default)

Choose this option if the connected component does support high sampling rates.

Notes:

•Some copy-protected DVD-Video discs may use

96 kHz digital audio only for A/D conversion to the analog audio outputs.

•With some discs, even if you select Down Sample Off, digital audio will be downsampled to 48 kHz regard- less, and in some cases, digital audio may not be out- put by the DV-SP1000/DV-SP1000E’s digital audio outputs.

75