Onkyo DV-SP1000E Initial Setup—Continued, Large: Select if the center speaker is, large

Initial Setup—Continued

5 Press the [ENTER] button, use

the Up and Down [ ]/[ ] but- Remote controller tons to select On or Off, and then

press the [ENTER] button.

ENTER

Choose Off if your multichannel amp has its own speaker setup function.

Choose On if your multichannel amp has no speaker setup function.

If you select Off, the following settings cannot be set and the Initial Setup menu closes. If you select On, the Speaker Setting menu appears.

Here you can specify the size of the speakers being fed from the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTPUTs.

For speakers with a cone diameter larger than 6-1/2 inches (16 cm), spec- ify Large. For those with a smaller diameter, specify Small. See page 76 for more information.

6 Press the [ENTER] button, use

the Left and Right []/[ ] but- Remote controller tons to set the Subwoofer set-

	ting, and then press [ENTER]
	again.
ENTER	Off: Select if no subwoofer is being
	used.
	On (default): Select if a subwoofer is
	being used.

8	Use the Left and Right [ ]/[ ]
Remote controller	buttons to set the Center Speaker
	setting, and then press the
	[ENTER] button.
ENTER	Large: Select if the center speaker is
	large.

Small (default): Select if the center speaker is small.

Off: Select if no center speaker is being used.

Note that if the Front Speaker Size is set to Small, the Large option cannot be selected.

9	Use the Left and Right [ ]/[ ]
Remote controller	buttons to set the Surround
	Speaker setting, and then press
	the [ENTER] button.
ENTER	Large: Select if the surround speakers
	are large.
	Small (default): Select if the surround
	speakers are small.
	Off: Select if no surround speakers are
	being used.
	The Initial Setup menu closes and the
	setup is complete.
	The DV-SP1000/DV-SP1000E is now
	ready for use. See page 45 for informa-
	tion on playing discs.

Notes:

•	You can change the language of the onscreen setup
	menus, and specify your preferred languages for DVD
	menus, soundtracks, and subtitles on the Language
	menu (see page 81).
•	When a DVD doesn’t have menus, soundtracks, and
	subtitles in different languages, its default language is
	used.
• When the DV-SP1000/DV-SP1000E is plugged in and
	set to Standby, it automatically checks if it’s con-
	nected to any other i.LINK components. If it is, the

7

Remote controller

ENTER

Use the Left and Right []/[ ] buttons to set the Front Speaker setting, and then press the [ENTER] button.

Large: Select if the front speakers are large.

Small (default): Select if the front speakers are small.

Note that if the Subwoofer setting is set to Off, this setting is fixed at Large.

default setting for the i.LINK Output Setting becomes

On. If not, the default becomes Off.

44