Onkyo DV-SP1000E Setting the Speaker Settings, these settings cannot be selected, speakers with a

Configuring the DV-SP1000/DV-SP1000E—Continued

	ON	STANDBY					TV
					I			INPUT
	1			2		3		+
								TV CH
	4			5		6		-
	7			8		9
								TV VOL
	+10			0	CLEAR
	SEARCH	MEMORY			DIMMER			AMP INPUT
	S			M		D		INPUT
				AMP INPUT
	DVD			V1	V2			V3
				MODE
	DVD		AMP		VCR			TV
								PICTURE
	ZOOM ON							CONTROL
ENTER				ENU	M	EN
	AUDIO		PM				U
		TO
	SEL
	+
	CH
	ZOOM			ENTER				VOL
	L MODE
	-
		RE		TURN		UP			SETUP
					SET
	DISPLAY							MUTING
	LAST MEMORY			STEP/SLOW				RANDOM
	REC LM							RD
	AUDIO	SUBTITLE			ANGLE			RESOLUTION
	AUDIO		SBTTL		ANGLE			RSLTN
	REPEAT			A-B				ASPECT
	REPEAT			A-B				ASPECT
	VIDEO INPUT		VIDEO OFF			LEARNING
	V IN		V OFF		L1			L 2
	OPEN/CLOSE
					L 3			L 4
				RC-563DV

Setting the Speaker Settings

1	Use the Up and Down [	]/[	]
Remote controller	buttons to select Speaker Set-
	ting, press the [ENTER] button,
	use the Up and Down [	]/[	]

ENTER	buttons to select On, and then
	press the [ENTER] button.
	When the Speaker Setting is set to Off,
	these settings cannot be selected.

3	Use the Up and Down [		]/[	]
Remote controller	buttons to select Front Speaker,
	press the [ENTER] button, use
	the Left and Right [	]/[	] but-
ENTER	tons to select an option, and then
	press the [ENTER] button.
	When setting the
	Speaker Setting, for
	speakers with a
	cone diameter
	larger than 6-1/2
	inches (16 cm),	Cone diameter
	specify Large. For
	those with a smaller diameter, specify
	Small. If you’re using THX-certified
	speakers, specify Small for all speakers.
	Large: Select if the front speakers are
	large.
	Small (default): Select if the front
	speakers are small.
	Note that if the Subwoofer setting is set
	to Off, this setting is fixed at Large.
4	Use the Up and Down [		]/[	]
Remote controller	buttons to select Center Speaker,
	press the [ENTER] button, use
	the Left and Right [	]/[	] but-
	tons to select an option, and then

ENTER

press the [ENTER] button. Large: Select if the center speaker is large.

Small (default): Select if the center speaker is small.

Off: Select if no center speaker is being used.

Note that if the Front Speaker setting is set to Small, the Large option cannot be selected. And if the Subwoofer setting is set to Off, only the Large and Off options can be selected.

2

Remote controller

ENTER

Use the Up and Down []/[ ] buttons to select Subwoofer, press the [ENTER] button, use the Left and Right []/[ ] but- tons to select an option, and then press the [ENTER] button.

Off: Select if no subwoofer is being used.

On (default): Select if a subwoofer is being used.

77