Onkyo DV-SP1000E instruction manual Selecting the Interlaced Setting, Progressive Setting

Configuring the DV-SP1000/DV-SP1000E—Continued

	ON	STANDBY					TV
					I			INPUT
	1			2		3		+
								TV CH
	4			5		6		-
	7			8		9
								TV VOL
	+10			0	CLEAR
	SEARCH	MEMORY			DIMMER			AMP INPUT
	S			M		D		INPUT
				AMP INPUT
	DVD			V1	V 2			V3
				MODE
	DVD		AMP		VCR			TV
								PICTURE
	ZOOM ON							CONTROL
ENTER				ENU	M	EN
	AUDIO		PM				U
		TO
	SEL
	+
	CH
	ZOOM			ENTER				VOL
	L MODE
	-
		RE		TURN		UP			SETUP
					SET
	DISPLAY							MUTING
	LAST MEMORY			STEP/SLOW				RANDOM
	REC LM							RD
	AUDIO	SUBTITLE			ANGLE			RESOLUTION
	AUDIO		SBTTL		ANGLE			RSLTN
	REPEAT			A-B				ASPECT
	REPEAT			A-B				ASPECT
	VIDEO INPUT		VIDEO OFF			LEARNING

Selecting the Interlaced Setting

1

Remote controller

ENTER

or

ENTER	Select Interlaced Setting 1, 2, or
	3, and then press the [ENTER] or
	Right [ ] button.
	The parameters appear onscreen.
2	Use the Up and Down [ ]/[	]
Remote controller	buttons to select the parameters,
	press the [ENTER] button, and
	then use the Left and Right [	]/
ENTER	[ ] buttons to set them.

3	Press the [ENTER] button.
Remote controller	The setting is stored.
	Use the same procedure to set the other
ENTER	parameters, pressing the [ENTER] but-
	ton when you’ve set each one.
	Press the [SETUP] button to exit the
	onscreen setup menu.

Progressive Setting

With this setting you can adjust various picture parame- ters for progressive scanning. There are three setup memories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g., sun shining through window) and one for nighttime viewing (e.g., curtains drawn, lights down).

Parameter	Range	Description
Contrast	–7...0...+7	Adjusts the picture con-
		trast.
Brightness	–7...0...+7	Adjusts the picture
		brightness.
Color	–7...0...+7	Adjusts the picture
		color.
Tint	–7...0...+7	Adjusts the picture tint.
Sharpness	–7...0...+7	Adjusts the picture
		sharpness.
Gamma	–7...0...+7	Adjusts the brightness
		of darker colors.
Y/C Time	–4...0...+4	Corrects small shifts in
Correction		color.

1

Remote controller

ENTER

or

ENTER

Select Progressive Setting 1, 2, or 3, and then press the [ENTER] or Right [ ] button.

The parameters appear onscreen.

2	Use the Up and Down [ ]/[	]
Remote controller	buttons to select the parameters,
	press the [ENTER] button, and
	then use the Left and Right [	]/
ENTER	[ ] buttons to set them.

73