First Time
5 | Use the Down [ | ] button to |
| select “Center,” and then use the | |
| Left and Right [ | ]/[ ] buttons to |
| select Small, Large, or None. |
Small: Select if the center speaker is small.
Large: Select if the center speaker is large.
None: Select if no center speaker is connected.
| Note: |
| • If the Front setting in step 4 is set to |
| Small, the Large option cannot be |
| selected. |
6 | Use the Down [ ] button to |
| select “Surround,” and then use |
| the Left and Right [ ]/[ ] but- |
| tons to select Small, Large, or |
| None. |
| Small: Select if the surround speak- |
| ers are small. |
| Large: Select if the surround speak- |
| ers are large. |
| None: Select if no surround speakers |
| are connected. |
| Note: |
| • If the Front setting in step 4 is set to |
| Small, the Large option cannot be |
| selected. |
7 | Press the [SETUP] button. |
| |
| Setup closes. |
| When you want to go back up one |
SETUP | menu level to “SP Config,” press the |
| [RETURN] button. |
Testing the speakers
To test that all of the speakers are working properly,
press the remote controller’s [TEST TONE] but- ton.
|
| LISTENING MODE |
| |
| STEREO | SURROUND |
|
|
| AUDIO | SUBTITLE RANDOM | REPEAT | |
TEST TONE | TEST TONE | CH SEL | LEVEL- | LEVEL+ |
|
| PLAY MODE |
|
|
| DISPLAY |
| L NIGHT | CINE FLTR |
|
|
|
The test tone will be output by each speaker in turn and the name of each speaker will appear on the dis- play. To turn off the test tone, press the [TEST TONE] button again.
•If the test tone is not produced by a speaker, or it’s produced by a speaker other than that shown on the display, you may have wired the speakers incorrectly and you should check your connec- tions (see pages 21, 22).
•If the test tone is not produced by a speaker and its name does not appear on the display, you may have set the speaker settings incorrectly (see page 38).
39