Onkyo HT-S4100 instruction manual First Time Setup

Cone diameter

First Time Setup—Continued

ON/STANDBY

REMOTE MODE

		RECEIVER	DVD	1
		TAPE
INPUT SELECTOR
1	2	3	CD
V1	V2	V3
4	5	6	MD
	MULTI CH	DVD
7	8	9	CDR
TAPE	TUNER	CD
+10	0	CLR	HDD
--/---	DIMMER	SLEEP
		CH	VOL
		DISC
		ALBUM
GUIDE			PREVIOUS
TOP MENU			MENU
SP A / B			MUTING
2–8	ENTER
PLAYLIST			PLAYLIST
RETURN				1, 9
RETURN			SETUP

	LISTENING MODE
STEREO	SURROUND
AUDIO	SUBTITLE RANDOM	REPEAT
TEST TONE	CH SEL LEVEL-	LEVEL+
	PLAY MODE
DISPLAY	L NIGHT	CINE FLTR
	RC-645S

Speaker Configuration setting only need to be changed if you’re not using the speakers in this package.

These settings cannot be changed while head- phones are connected, speaker set B is on, or the multichannel DVD input is being used.

Speaker Configuration

This section explains how to specify your speaker con- figuration.

For speakers with a cone diameter

larger than 6-1/2 inches (16 cm), specify Large (full band). For those

with a smaller diameter, specify

Small (default crossover 100 Hz). The crossover frequency can be

changed on page 55.

1	Press the [RECEIVER] button fol-
RECEIVER	lowed by the [SETUP] button.

SETUP

2 Use the Up and Down []/[ ] buttons to select “1. SP Config,” and then press the [ENTER] but- ton.

ENTER

3	While the Subwoofer setting is
	selected, use the Left and Right
	[ ]/[ ] buttons to select Yes or
	No.
	Yes: Select if a subwoofer is con-
	nected.
	No: Select if no subwoofer is con-
	nected.
4	Use the Down [	] button to
	select “Front,” and then use the
	Left and Right [	]/[ ] buttons to
	select Small or Large.

Small: Select if the front speakers are small.

Large: Select if the front speakers are large.

Note:

• If the Subwoofer setting in step 3 is set to No, this setting is fixed at Large and does not appear.

38