Onkyo HT-S4100 Using the Tuner, Listening to the Radio, Tuning into Radio Stations

Using the Tuner

Listening to the Radio

	TUNING MODE
	TUNING
	TUNING / PRESET	MASTER VOLUME
STANDBY/ON
	ENTER
	STANDBY
A SPEAKERS B	TONE+STEREO LISTENING MODEDISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE RETURN SETUP

						CLEAR
PHONES
MULTl CH	DVD	VIDEO 1/VCR	VIDEO 2	VIDEO 3	TAPE	TUNER	CD
					TUNER		SETUP

With the built-in tuner, you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection.

1	Use the [TUNER] input selector
	TUNER
	button to select either AM or FM.
	In this example, FM has been selected.
	Band	Frequency
	(Actual display depends on country.)

Tuning into Radio Stations

■Auto Tuning Mode

1 TUNING MODE	Press the [TUNING MODE] button
	so that the AUTO indicator
	appears on the display.
2	Press the TUNING Up or Down
TUNING / PRESET	[ ]/[ ] button.
	Searching stops when a station is
ENTER	found.

■Manual Tuning Mode

1	TUNING MODE	Press the [TUNING MODE] button
		so that the AUTO indicator disap-

pears from the display.

2		Press and hold the TUNING Up or
	TUNING / PRESET	Down [ ]/[ ] button.
		The frequency stops changing when
	ENTER	you release the button.
		Press the buttons repeatedly to change
		the frequency one step at a time.

FM frequency in 0.2 MHz steps, 10 kHz steps for AM. When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator appears on the display, as shown.

TUNED AUTO

FM STEREO

Tuning into weak FM stereo stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

Note:

• You can also use the remote controller’s Up and Down []/[ ] buttons to tune the radio.

42