Advanced
Correcting Sound and Picture Sync
When using progressive scanning on your DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. You can set it to 0, 20, or 40 milliseconds.
INPUT SELECTOR
ON/STANDBY
REMOTE MODE
|
| RECEIVER | DVD |
|
| TAPE |
|
INPUT SELECTOR |
| ||
1 | 2 | 3 | CD |
V1 | V2 | V3 |
|
4 | 5 | 6 | MD |
| MULTI CH | DVD |
|
7 8 9 CDR
TAPE TUNER CD
+10 0 CLR HDD
RECEIVER
CH
DISC
ALBUM
VOL
GUIDE | PREVIOUS |
TOP MENU | MENU |
SP A / B | MUTING |
| ENTER |
PLAYLIST | PLAYLIST |
RETURN | SETUP |
1
RECEIVER
Press the [RECEIVER] REMOTE MODE button.
2
V1 V2 V3
DVD
Press and hold, for more than 4 seconds, the input selector but- ton for the input source that you want to correct.
This can be the [DVD], [VIDEO 1], [VIDEO 2], or [VIDEO 3] input source.
3 Use the Left and Right []/[ ] buttons to set the delay to 0, 20, or 40 milliseconds.
The previous display reappears if you don’t do anything for 5 minutes.
Note:
•This setting is not available when the Direct listening mode is used with an analog input signal.
58