Onkyo HT-S4100 instruction manual First Time Setup, TUNER Digital inputs cannot be assigned to

First Time Setup

Assigning Digital Inputs to Input Sources

2, 3

								TUNING	/ PRESET	MASTER VOLUME
STANDBY/ON
								ENTER
	STANDBY
A SPEAKERS B	TONE	+	STEREO	LISTENING MODE	DISPLAY DIGITAL INPUT	RT/PTY/TP MEMORY TUNING MODE		RETURN	SETUP
							CLEAR
PHONES
	MULTl CH	DVD	VIDEO 1/VCR	VIDEO 2	VIDEO 3	TAPE	TUNER	CD

1

To enjoy Dolby Digital and DTS, you must connect your DVD player to the AV receiver by using a digital audio connection (coaxial or optical).

Here are the default assignments.

Input selector	Default assignment
DVD	COAX
VIDEO 1/VCR	- - - -
VIDEO 2	OPT 1
VIDEO 3	- - - -
TAPE	- - - -
CD	OPT 2

With this function, you can assign digital inputs to input sources. For example, if you connect your DVD player to DIGITAL IN OPTICAL, you’ll need to assign that input (OPT1) to the DVD input source.

You can change the assignments as follows.

Note:

Make sure you also set your digital sources to send out a digital signals. Please refer to the digital sources’ man- ual.

1		Press the input selector button
		for the source that you want to
DVD	VIDEO 1/VCR	VIDEO 2
		assign.
VIDEO 3	TAPE	TUNER (Digital inputs cannot be assigned to
		the TUNER input source.)
CD
2		Press the [DIGITAL INPUT]
	DIGITAL INPUT	button.
		The current assignment appears.

3		Press the [DIGITAL INPUT] but-
	DIGITAL INPUT	ton repeatedly to select COAX,
		OPT1, OPT2, or “– – – –” (analog).

Changing the Input Display

If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or DS-A1XP RI Dock to the

TAPE IN/OUT or VIDEO 3 IN jacks, for to work properly, you must change this setting.

This setting can only be changed on the AV receiver.

						TUNING / PRESET	MASTER VOLUME
STANDBY/ON
						ENTER
STANDBY
A SPEAKERS B	TONE	+	STEREO LISTENING MODE	DISPLAY DIGITAL INPUT	RT/PTY/TP MEMORY TUNING MODE	RETURN SETUP
					CLEAR
PHONES
	MULTl CH	DVD	VIDEO 1/VCR VIDEO 2	VIDEO 3	TAPETUNER	CD
			1, 2		1, 2
1 TAPE		Press the [TAPE] or [VIDEO 3]
		input selector button so that
		“TAPE” or “VIDEO3” appears on
		the display.
or
VIDEO 3

2		Press and hold down the [TAPE]
	TAPE	or [VIDEO 3] input selector but-
		ton (about 3 seconds) to change
		the setting.
	or	Repeat this step to select MD, CDR, or
		HDD.
	VIDEO 3
		For the TAPE input selector, the setting
		changes in this order:
		TAPE → MD → CDR → HDD
		→
		For the VIDEO 3 input selector, the set-
		ting changes in this order:
		VIDEO 3 → HDD
		→

Note:

HDD can be selected for the TAPE input selector or VIDEO 3 input selector, but not both at the same time.

37