Setup
Before using your monitor, check that the following accessories are included in your carton:
•Power cord (1)
•USB cable (1)
•Monitor stand (1)
•Warranty card (1)
•Notes on cleaning the screen’s surface (1)
•This instruction manual (1)
Step 1: Connect your monitor to your computer
Turn off the monitor and computer before connecting.
xConnecting to an IBM PC/AT or compatible computer
AC IN
to video output
IBM PC/AT or compatible computer
xConnecting to a Macintosh or compatible computer
You will need a Macintosh adapter (not supplied).
AC IN
Macintosh adapter (not supplied)
Macintosh or | to video |
compatible computer | output |
Step 2: Connect the power cord
With the monitor and computer switched off, first connect the power cord to the monitor, then connect it to a power outlet.
AC IN
to a power outlet
to AC IN
power cord (supplied)
Step 3: Turn on the monitor and computer
First turn on the monitor, then turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor’s controls to adjust the picture.
6
