Philips DVD750VR owner manual Remote Control Setup, Putting Batteries in the Remote Control

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 16

16 Remote Control Setup

Putting Batteries in the Remote Control

	Remove the battery compartment lid on the bottom
1 lid.of the remote control by pressing the tab, then lifting the
2	Place two AA batteries inside the battery compart-
	ment with their + and – ends aligned as indicated.
3 Replace the battery compartment lid.

Using the Remote Control

●Point the remote control at the DVD/VCR’s remote sensor (marked IR, see page 22) when using the remote to operate the DVD/VCR. Do not point the remote at the TV.

●Do not put objects between the remote and the DVD/VCR.

Recycling Guidelines/Battery Safety

●Your new product and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly dis- posed.Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, and packaging whenever you replace existing equipment.

●Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit: Install ALL batteries correctly, with the + and - markings on the battery aligned as indicated on the unit;

Do not mix batteries, for example, old with new or carbon with alkaline; and

Remove batteries when the unit will not be used for a long time.

1

2

3