Philips DVD750VR owner manual Antenna or Cable TV Signal to ANT-IN Jack

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 11

Hookups (cont’d) 11

DVD/VCR to a TV that has Audio and Video In jacks

Using the supplied red, white, and yellow cables

This connection will let you use the features of both theVCR and the DVD Player.

Antenna or Cable TV

1 Signal to ANT-IN Jack

DVD/VCR	VCR				DVD
AUDIO OUT AUDIO IN				S-VIDEO COMPONENT AUDIO		DIGITAL
ANT-IN				OUT VIDEO OUT	OUT	AUDIO OUT
L	L			Y
R	R			Pb/	L
				Cb
ANT-OUT VIDEO OUT VIDEO IN		PROGRESSIVE		Pr/		COAXIAL
		I	P		R	Audio and
				Cr

Video IN Jacks

2Audio Cables

3Video Cable

on TV

1 Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

2 Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to connect the DVD/VCR’s white DVD/VCR AUDIO OUT (left) jack to the TV’s AUDIO IN jack.You will not use the red cable. Or, purchase a “splitter” audio cable to go from the left/right AUDIO OUT jacks of the DVD/VCR to the TV’s single AUDIO IN jack.

3 Connect the yellow video cable (supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS, Composite, or Baseband video.

4 Connect the power cords of the TV and the DVD/VCR to a power outlet.Turn on the TV and set it to the correct Audio/Video In chan- nel. Go to your lowest TV channel (01 or 02), then change channels down- ward until you see VCR or DVD playback on the TV screen.

To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Audio/Video In channel.

5 You are ready to turn on the DVD/VCR. Go to page 17 to complete the first-time setup.