Philips DVD750VR owner manual DVD/VCR to a TV that has Component Video In jacks

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 12

12 Hookups (cont’d)

DVD/VCR to a TV that has Component Video In jacks

1	DVD/VCR VCR			DVD
	AUDIO		S-VIDEO COMPONENT AUDIO
	ANT-IN		OUT	VIDEO OUT OUT
	L	L		Y
	R	R		Pb/
				Cb
	ANT-OUT VIDEO OUT VIDEO IN		PROGRESSIVE	Pr/
			I P
				Cr
Antenna or
Cable TV		2		3
Signal

DIGITAL

AUDIO OUT

COAXIAL

AUDIO IN

L

R

COMPONENT

VIDEO IN

Y

Cb/Pb

Cr/Pr

1 Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

2 Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors.

3 Connect component video cable (not supplied) to the COMPO- NENT VIDEO OUT jacks on the DVD/VCR and to the COMPO- NENT VIDEO IN jacks on the TV. The Component Video In jacks on the TV are usually red, blue, and green.

The Component Video connection only supplies video (picture) for the DVD Player of the DVD/VCR.Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable. To connect the supplied RF coaxial cable, see step 2 on page eight.To connect the supplied yellow video cable, see step 3 on page 11.

If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD player, and make sure INTERLACE/PRO- GRESSIVE SCAN SELECTOR is set to PROGRESSIVE (P).

4 Connect the power cords of the DVD/VCR and TV to a power outlet. Turn on the TV and set it to the Component Video In channel for DVD Player features.

If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4 at the TV. If you are using the yellow video cable for VCR playback, choose the Video In channel at your TV.

Go to your lowest TV channel and change channels down until you see VCR or DVD playback on the TV screen, or try channel 3 or 4 at the TV.

To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Component Video In channel.

5 You are ready to turn on the DVD/VCR. Go to page 17 before turn- ing on the DVD/VCR.

6 After you complete the VCR setup as described on page 17, set DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details are on page 72. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the TV speakers.