Philips DVD750VR Video Cassette Playback, Read and follow the steps below to play a tape

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 18

18 Video Cassette Playback

Read and follow the steps below to play a tape.

1 Turn on the TV. Set it to channel 3 or 4 or its AUDIO/VIDEO IN channel. This depends on how you connected the DVD/VCR to a TV.

Details are on pages 7-15.

2 With the DVD/VCR power off, insert a tape in the cassette compartment of the DVD/VCR. The VCR light will appear on the front of the DVD/VCR. If the tape’s record tab has been removed, play will start automatically. If the DVD/VCR power is already on, press VCR to put the DVD/VCR in VCR mode if necessary.The green VCR light will appear on the front of the DVD/VCR.

3 If playback does not start automatically, press VCR, then press PLAY B.

4 Press STOP C to stop playback.

5 Press h to rewind the tape.

6 After the tape stops, press STOP/EJECT A on the front of the DVD/VCR to remove the tape.

1 Turn on the TV.

	Insert a tape in the
2 DVD/VCR.
			STANDBY-ON
	SEARCH	MODE	DISPLAY
	REPEAT REPEAT		AUDIO
		A-B
	SUBTITLE	ZOOM	ANGLE	SKIP / CH
	RETURN	TITLE CLEAR/RESET SLOW
		VCR/TV			3
	DVD			VCR
	SYSTEM			DISC/VCR
5	MENU			MENU
		OK
4	STOP	PLAY		PAUSE
	TIMER SET	VCR Plus+		RECORD
	SPEED
		1	2	3
	4	5	6	7
	8	9	0	+10

6Press STOP/EJECT A on the DVD/VCR.

Helpful Hints

•Other tape playback features are on pages 44-51.

•If AUTO REPEAT is ON, playback will begin when you insert a tape, even when the record tab is intact. Details are on page 44.

•You must connect the DVD/VCR to a TV using the RF coaxial cable or the audio/video cables in order to use the VCR features.These hookups are explained on pages eight and 11.