Philips DVD750VR owner manual DVD/VCR to a TV and a Stereo, 1Antenna/Cable TV Signal

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 14

14 Hookups (cont’d)

DVD/VCR to a TV and a Stereo

1Antenna/Cable TV Signal

DVD/VCR VCR				DVD
AUDIO OUT AUDIO IN			S-VIDEO COMPONENT AUDIO		DIGITAL
ANT-IN			OUT VIDEO OUT	OUT	AUDIO OUT
L			Y
R			Pb/	L
			Cb
ANT-OUT VIDEO OUT VIDEO IN	PROGRESSIVE		Pr/		COAXIAL
	I	P		R
			Cr

VIDEO IN

3

2	AUDIO (LEFT) IN
	AUDIO (RIGHT) IN

1 Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

2 Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo. Match the cable colors to the jack colors.

3 Connect the supplied yellow video cable to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. To use Component Video cable or S-Video cable instead for the DVD Player, see pages 12-13.You will still need the yellow video cable or RF coaxial cable for VCR features.

4 Connect the power cords of the DVD/VCR,TV, and Stereo to a power outlet.Turn on the TV and set it to the Video In channel. Or, simply go to your TV’s lowest channel (02 or 03) and continue changing chan- nels downward at the TV until you see VCR or DVD playback on the TV screen.

To help you find the right Video In channel at the TV, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Video In channel.

5 You are ready to turn on the DVD/VCR. Go to page 17 before turn- ing on the DVD/VCR.

6 After you complete the VCR setup as described on page 17, set DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details are on page 72. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.