Philips DVD750VR Press o or p until your desired tape speed appears, Press CLEAR/RESET

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:30 AM Page 43

Timer Recording with the VCR Plus+ Programming System (cont’d) 43

Press o or p until your desired tape speed appears.
(Example: SP) There are cases in which the program
5 information does not match your area. If the incorrect
information appears, select the number you want to change
using s.Then, enter the correct numbers using o or p.
ONE TIME PROGRAM
PROGRAM NUMBER		1
DATE	05/04	SUN
START TIME	07:30	PM
END TIME	08:30	PM
CHANNEL	16
REC SPEED	BSP
	SP
	SLP

6 Press CLEAR/RESET.

7 Press TIMER SET. The DVD/VCR will turn off and the red RECORD TIMER light will appear on the front of the DVD/VCR. In some cases, the DVD/VCR will switch to DVD mode instead.You may use the DVD Player during a timer recording.

If you want to use the VCR until time for the recording, don’t press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won’t be using the VCR anymore (until after the recording).When the RECORD TIMER light is on, you can- not put the DVD/VCR in VCR mode by pressing VCR or SOURCE.You must first press TIMER SET to cancel the timer recording temporarily.Then, you can use the VCR fea- tures again.

Press TIMER SET for the recording.

Insert a tape in the VCR.

Leave the Cable Box/DBS on

(if applicable).

5

7

		STANDBY-ON
SEARCH	MODE	DISPLAY
REPEAT REPEAT		AUDIO
	A-B
SUBTITLE	ZOOM	ANGLE	SKIP / CH
RETURN	TITLE CLEAR/RESET SLOW			6
	VCR/TV
DVD			VCR
SYSTEM			DISC/VCR
MENU			MENU
	OK
STOP	PLAY		PAUSE
TIMER SET	VCR Plus+		RECORD
SPEED
	1	2	3
4	5	6	7
8	9	0	+10