Philips DVD750VR owner manual Multi-Channel Television Sound, Understanding Displays

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:30 AM Page 49

Multi-Channel Television Sound 49

Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usu- ally, that means your program is recorded in a second language). Of course, your DVD/VCR will play tapes recorded in monaural (single-source) sound as well.

Your DVD/VCR also will record a video cassette in Hi-Fi stereo or in second audio, so when you play that tape on the DVD/VCR, it will be in stereo or second audio.

Read the directions on this page to familiarize yourself with the stereo and second audio setups.Then fol- low the directions on page 50 to record in stereo or second audio, or follow the directions on page 51 to play tapes recorded in Hi-Fi stereo.

Understanding Displays

When you watch TV channels through the DVD/VCR, portions of the display shown below will appear when you press DISPLAY twice.

STOP	5:40 PM
	CH 02
	STEREO
	SAP
SLP

If SAP or STEREO appears, the program is available in second audio or stereo. Even though a program is available in second audio or stereo, you must pro- gram the DVD/VCR to receive or record the program. Follow the directions on page 50.

This display is not available during tape playback.

To play programs in stereo, connect the DVD/VCR to a Stereo or TV as described on pages 11 and 14.You will use the red and white AUDIO OUT jacks on the DVD/VCR.