Philips DVD750VR DVD to Videotape Duplication, To stop recording, press VCR, then press Stop C

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 39

DVD to Videotape Duplication 39

Follow the steps below to copy a DVD to a videotape. This will

be possible only if the DVD is not copy protected. Before you begin:

●Put a videotape in the cassette compartment. Make sure the tape’s record tab is intact and the tape is long enough to record the DVD.

●Put the DVD you want to copy in the disc tray.

●Press VCR so the green VCR light appears on the front of the DVD/VCR.

●Turn on the TV.

1 Point the remote control at the DVD/VCR. Press Number buttons 0, 0, 3. “DISC” will appear on the TV screen.

DISC

2 Press SPEED until the desired tape speed (SP or SLP) appears briefly on the screen. Details about tape speed are on page 76.

3 Press RECORD I to start recording. The red RECORD light will appear on the front of the DVD/VCR.

4 Press DVD. Press PLAY B to play the disc.

5 To pause the recording, press VCR, then press PAUSE k once. The red RECORD light will flash. To resume recording, press RECORD I or press PAUSE k again. The red RECORD light will come on again.

		STANDBY-ON
SEARCH	MODE	DISPLAY
REPEAT	REPEAT	AUDIO
	A-B
SUBTITLE	ZOOM	ANGLE SKIP / CH

RETURN TITLE CLEAR/RESET SLOW

4		VCR/TV			5,6
	DVD			VCR
	SYSTEM			DISC/VCR
	MENU			MENU
			OK
6	STOP		PLAY	PAUSE	5
	TIMER SET VCR Plus+			RECORD
2	SPEED
		1	2	3
	4	5	6	7
1	8	9	0	+10
				3,5

6 To stop recording, press VCR, then press STOP C.

Helpful Hints

• A timer recording is not possible during DVD to videotape duplication.

• You cannot copy a DVD to a videotape if you are using Progressive Scan. Details are on page 12.