Philips DVD750VR owner manual Connections, Cable Box/Satellite Receiver, Signal RF coaxial cable

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 9

Hookups (cont’d) 9

DVD/VCR to Cable Box or Satellite Receiver and TV

Using only basic RF coaxial cables

This connection will let you use the features of both theVCR and the DVD Player.

1	2DVD/VCR
Cable Box/Satellite Receiver

IN

OUT

75 ANT / CABLE

	DVD/VCR VCR			DVD
	AUDIO OUT AUDIO IN		S-VIDEO COMPONENT AUDIO		DIGITAL
	ANT-IN		OUT VIDEO OUT	OUT	AUDIO OUT
	L	L	Y
Cable	R	R	CB	L
			RF coaxial cableCR R
	ANT-OUT VIDEO OUT VIDEO IN				COAXIAL

Signal

RF coaxial cable	3	TV’s ANTENNA
		IN Jack

Connections

1 Connect a Cable TV or Satellite signal to the IN jack on the Cable Box/Satellite Receiver.

2 Use an RF coaxial cable (as the one supplied) to connect the OUT jack on the Cable Box/Satellite Receiver to the ANT-IN (Antenna In) jack on the DVD/VCR.

3 Use a second RF coaxial cable to connect the ANT- OUT (Antenna Out) jack on the DVD/VCR to the TV’s Antenna In jack.

Remember...

There are two ways to connect your Cable Box/Satellite Receiver to the DVD/VCR.With the connection on this page:

●Select TV channels at the Cable Box/Satellite Receiver, not the DVD/VCR.To record or view TV channels, follow these steps:

1)Press VCR to put the DVD/VCR in VCR mode.The green VCR light will appear on the front of the DVD/VCR.

2)Press SKIP3/CHo or SKIP /CHp to set the DVD/VCR to the Cable Box/Satellite Receiver output channel (03 or 04).

3)Set the TV to the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel is channel 3 when the DVD/VCR is new.To change it from 3 to 4, press and hold the (VCR) PLAY B button on the DVD/VCR for 3-5 seconds during tape play- back. For more details, see step 4 on page 8.

4)Select the channel you want to view/record at the Cable Box/Satellite Receiver.

●You may not view a channel other than the one you are recording.

●You can only program a timer recording for one channel at a time. Set your Cable Box/Satellite Receiver to the channel you want to record.When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/Satellite Receiver output channel). (This is step 7 on page 38.) Leave the Cable Box/Satellite Receiver on for a timer recording.

●If you use the VCR Plus+ Programming system, set the Cable/TV channel to 03 or 04 (Cable Box/DBS output channel) for every VCR Plus+ channel in the VCR Plus+ Cross Reference Map.You must set the Cable Box/DBS to the channel you want to record; leave the Cable Box/DBS on for the timer recording. Details are on page 40.

Helpful Hint

•If your Cable Box or Satellite Receiver has Audio and Video Out jacks, use audio and video cables to connect them to the VCR AUDIO IN and VIDEO IN jacks on the rear of the DVD/VCR.You will not need the RF coaxial cable con- nection between the Cable Box/Satellite Receiver and the DVD/VCR as described at step 2.