Ricoh SP C240SF Could not be performed Set Original to ADF, Press JobReset to cancel the job

		Error and Status Messages on the Screen
Message	Causes	Solutions
		• Use the ADF, even when copying a
	2-in-1, 4-in-1, or 2-sided copy	single sheet.
Cannot copy.		• If you need to use the exposure glass,
	could not be performed
Set Original to ADF	because the originals were not	turn off [Comb. 2 on 1], [Comb. 4 on
		1], or [2 Sided Copy] under copy
	placed in the ADF.
		settings, and then try again. See
		p.253 "Copy Settings".
	The paper size set for the	Press [FormFeed] to begin printing, or
Check Paper Size	document differs from the size of
		press [JobReset] to cancel the job.
	the paper in the indicated tray.
	The paper type set for the
Check Paper Type	document differs from the type	Press [FormFeed] to begin printing, or
	of the paper in the indicated	press [JobReset] to cancel the job.
	tray.
		• Confirm that the telephone line is
		properly connected to the machine.
		• Disconnect the telephone line from
Connection Failed	The line could not be connected	the machine, and connect a standard
		telephone in its place. Confirm that
	correctly.
		you can make calls using the
		telephone. If you cannot make calls
		this way, contact your telephone	9
		company.
Cover open	A cover is open.	Close the cover completely.
Density Sensor	The machine failed to adjust	Clean the toner density sensor. See p.406
Require Cleaning	color registration.	"Cleaning the Toner Density Sensor".
	No Quick Dial entry is	• Press a different One Touch button.
Dest. is not		• Assign a registered destination to the
	associated with the One Touch
Programmed		One Touch button. See p.177
	button you pressed.
		"Registering Scan Destinations".

385