2. Getting Started

 

In copier mode

In scanner mode

In fax mode

 

 

 

 

Left

3 mm

0 mm

1 mm (Letter, Legal)

 

 

 

0 mm (other sizes)

 

 

 

 

Bottom

3 mm

2 mm

2 mm

 

 

 

 

2

Placing Originals

This section describes the procedure for placing originals on the exposure glass and in the ADF.

Do not place originals before any correction fluid and toner has completely dried. Doing so may make marks on the exposure glass that will appear on copies.

The original in the ADF takes precedence over the original on the exposure glass if you place originals both in the ADF and on the exposure glass.

Because colors made by marker or highlighter pen on originals are difficult to reproduce, they might not appear on copies, or might appear as different colors.

Placing originals on the exposure glass

The exposure glass enables you to scan and send documents that cannot be fed into the ADF.

• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.

1.Lift the ADF.

Be careful not to hold the input tray when lifting the ADF, for the tray might be damaged.

124

Page 126
Image 126
Ricoh C242SF, SP C240SF operating instructions Placing Originals, Placing originals on the exposure glass, Lift the ADF