Ricoh C242SF, SP C240SF operating instructions Print cartridges photo conductor unit

2. Getting Started

	Item	Description
	Notes	• The number of sheets that can be printed in one minute is
		approximately half that of middle thick paper.
		• Avoid using adhesive label paper on which glue is exposed. Glue
		may stick to the inner parts of the machine, which can cause paper
2		feed problems, deterioration in print quality, or premature wear of the
		print cartridge's photo conductor unit.
	Envelope
	Item	Description
	Supported paper tray	Tray 1 and bypass tray
	Duplex supported size	None

Notes

•Avoid using self-adhesive envelopes. They may cause machine malfunctions.

•The number of envelopes that can be printed in one minute is approximately half that of middle thick paper.

•Paper can be loaded only up to the lower of the two paper limit marks of the tray.

•If printed envelopes come out badly creased, load the envelopes in the opposite direction. Also, configure the printer driver to rotate the print object 180 degrees. For details about changing the loading orientation, see the printer driver Help.

•Environmental factors can degrade the print quality on both recommended and non-recommended envelopes.

•If envelopes are severely curled after printing, flatten them by bending them back against the curl.

•After printing, envelopes sometimes have creases along their long edges and toner smear on their unprinted sides. Their print images might also be blurred. When printing large, black-solid areas, striping can occur as a result of the envelopes overlapping.

•To correctly specify the length of an envelope whose flap opens along its short edge, be sure to include the open flap when measuring.

CER112

94