Ricoh C242SF, SP C240SF operating instructions Unsupported Types of Paper

2.Getting Started

•You may not be able to perform duplex printing on 8 " × 13 ", 81/2 " × 13 ", Folio (81/4 " × 13 "), or 16K (195 mm × 267 mm) size paper in the following cases:

•PCL/DDST printer driver

When [Gradation:] in [Print Quality] is set to [Fine]

2 • PostScript 3 printer driver

When [Print Quality:] in [Printer Features] is set to [Best Quality]

Unsupported Types of Paper

Avoid using the following paper as they are not supported by this machine.

•Paper meant for an ink-jet printer

•Bent, folded, or creased paper

•Curled or twisted paper

•Torn paper

•Wrinkled paper

•Damp paper

•Dirty or damaged paper

•Paper that is dry enough to emit static electricity

•Paper that has already been printed onto, except a preprinted letterhead.

Malfunctions are especially likely when using paper printed on by other than a laser printer (e.g. monochrome and color copiers, ink-jet printers, etc.)

•Special paper, such as thermal paper, aluminum foil, carbon paper and conductive paper

•Paper that is heavier or lighter than the specified limitations

•Paper with windows, holes, perforations, cutouts, or embossing

•Adhesive label paper on which the adhesive under-layer or base paper is exposed

•Paper with clips or staples

•Do not use ink-jet printer paper because it may stick to the fusing unit and cause a paper jam.

•Do not load OHP transparencies. Load translucent media only.

•Do not use paper that has already been printed onto by other printers.

•When loading paper, take care not to touch the surface of the paper.

•Even supported types of paper may cause paper jams or malfunctions if the paper is not in good condition.

96