Replacing Print Cartridges

CER088

• Do not touch the ID chip on the side of the print cartridge as indicated in the illustration below.

CES032

When removing print cartridges, be careful not to touch the Laser Scanning Unit on the underside of the upper cover (the position shown by the arrow in the illustration below).

9

CES137

If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black toner. Change the color mode setting to Black and White using the machine's driver.

If black toner runs out, you cannot print in black and white or color until the black print cartridge is replaced.

1.Pull up the lever on the top cover, and then carefully raise the top cover. Make sure that the ADF is closed.

395

Page 397
Image 397
Ricoh SP C240SF, C242SF operating instructions 395