Ricoh C242SF Memory Overflow, While scanning the second or, Been scanned in memory, or press, 388

9. Troubleshooting

	Message		Causes	Solutions
		•	The machine's memory
			reached capacity while
			scanning the first page of
			the original to store a fax	Resend the fax in parts as several smaller
	Memory Overflow		job in memory before	individual faxes, or send at a lower
			transmission.	resolution.
		•	The machine's memory
			reached capacity while
			sending a fax via LAN-Fax.
	Memory Overflow	Memory has reached capacity
		while scanning the second or		Press [TX] to send only the pages that have
	TX	later pages of the original when		been scanned in memory, or press
	Cancel	trying to send a fax in Memory		[Cancel] to cancel.
		Transmission mode.
	Misfeed: Dup. Unit	Paper has been jammed in the		Remove the jammed paper. See p.358
	Remove Paper	duplex unit.		"Removing Printing Jams".
	Misfeed: Paper Tray	Paper has been jammed in the		Remove the jammed paper. See p.358
		paper tray.		"Removing Printing Jams".
	Misfeed: Stnd. Tray	Paper has been jammed in the		Remove the jammed paper. See p.358
		paper exit area.		"Removing Printing Jams".
9	Misfeed: Tray 1	Paper has been jammed in the		Remove the jammed paper. See p.364
		ADF input tray.		"Removing Scanning Jams".
	Misfeed: Tray 2	Paper has been jammed in the		Remove the jammed paper. See p.364
		ADF output tray.		"Removing Scanning Jams".
	Net Communication	Connection with the server was
		lost while sending or receiving		Contact the network administrator.
	Error
		data.
		A scanned file could not be sent
		because the machine has not		Wait until the machine receives the IP
	Network is not Ready	received IP address information		address information completely, and then
		from the DHCP server		try the operation again.
		completely.
	On Hook or Stop key	The machine has been off-hook		Put down the handset or press the [Clear/
		for an extended period of time.		Stop] key.

388