7. Configuring the Machine Using the Control Panel

Displays the machine's MAC address.

Ethernet Speed

Displays the current Ethernet speed setting.

100Mbps Full Duplex

100Mbps Half Duplex

10Mbps Full Duplex

10Mbps Half Duplex

Ethernet Unavailable

Appears when a network cable is not connected.

Set Ethernet Speed

Specifies the speed for Ethernet communication. Select a speed that matches your network environment.

For most networks, the default setting is the optimum setting. Default: [Auto Select]

Auto Select

100Mbps Full Duplex

7

• 100Mbps Half Duplex

10Mbps Full Duplex

10Mbps Half Duplex IPv4 Configuration

DHCP

Sets the machine to receive its IPv4 address, subnet mask, and default gateway address automatically from a DHCP server.

When DHCP is used, you cannot specify the IPv4 address, subnet mask, or default gateway address manually.

Default: [Active]

Active

Inactive

IP Address

Specifies the machine's IPv4 address when DHCP is not used. Use this menu to check the current IP address when DHCP is used. Default: XXX.XXX.XXX.XXX

The numbers represented by "X" vary according to your network environment.

Subnet Mask

284

Page 286
Image 286
Ricoh C242SF, SP C240SF operating instructions Dhcp